"In the name of Allah, most
Gracious, most Compassionate"
Phone
044 4213 1795Mobile
+91 90 426 86793 +91 78 457 86623Our forte lies in supplying and trading a quality assured range of Sensors. The range we offer under this category comprises Ultrasonic Distance Sensor, Ultrasonic Transducer Pair, Temperature Sensor and Hall Effect Sensor. Specifically designed and developed from latest engineering technology, these sensors are highly reckon for their quick responses, accurate measurements and longer usage life. We provide this range in plethora of specifications at market leading prices.
Pir motion detector module features :
Our offered Ultrasonic Distance Sensor comes with an ASCII serial O/P and provided optimum ranging & detection of long to short distance ranges. Owing to their stable, precise, non-contact and accurate distance measurements from about 2 cm to 4 meters, these sensors have gain wide prominence in the market. Compactly designed, easy usable, high ranging and easily interfaced upon micro controllers RX pin, our product is highly suitable for mapping and distance measurement. At the distance of every 50 ms sensor transmits an ultrasonic burst and send out ASCII value of distance that is equal to the time required for the burst echo to be return to the sensor. Ultrasonic distance sensors are perfect for any number of applications that need the measurement between stationary and moving objects. Besides robotics applications, this product is also useful in security systems or as an infrared replacement. Owing to their optimum stability these ultrasonic distance sensor modules can be used for micro mouse application instead of IR sensors.
Features of Ultrasonic Distance Sensor are as follows :
Owing to our trusted vendor base, we are able to provide the customers with highly reliable Ultrasonic Transducer Pair. The offered product works on 40Khz frequency and is highly suitable for making different types sensors for measuring distances and detecting obstacles.
Features of these Ultrasonic Transducer Pair are:
Our offered LM35 series Temperature Sensor is a precisely integrated circuit whose voltage output is linearly proportional to the centigrade temperature. These sensors have an added advantage over kelvin calibrated sensors and do not require the subtracting of constant voltage from its output to obtain convenient centigrade scaling. Our product need not to be calibrated or trimmed to normal accuracy of ±1/4 °C at room temperature and ±3/4°C over a full -55 to +150°C temperature range. The low output impedance, linear output, and precise inherent calibration of these temperature sensors makes the interfacing to readout or control circuitry easily. These sensors can be used with single, plus or minus power supplies because it draws only 60 mA from its supply and has very low self-heating, less than 0.1°C in still air.
Features of our offered Temperature Sensor are as follows:
We are offering reliable Hall Effect Sensor which is specifically engineered by the experts using Bi CMOS technology. The unique hall element geometries and low offset amplifiers installed in this system helps in minimizing the noise and residual offset voltage caused from temperature excursions, over molding and thermal stress.
Features and Benefits of these Hall Effect Sensors are:
TSOP 1738 Features:
Technical Specifications:
Features:
Applications:
Features:
Applications:
A simple Flex Sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo power glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
A simple Flex Sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
With our expertise in this domain, we are able to offer a superior quality range of Three Axis Accelerometer Module. These modules are highly efficient and fabricated using optimum quality raw material. The adxl335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Features:
Technical specification:
Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.
Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly.
These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.
Features:
Dimensions:
Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.
These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.
Dimensions:
Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.
These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.
Dimensions:
The Ring Sensor enables intuitive scrolling and menu navigation functionality for consumer electronic devices in an easy to integrate, high resolution, ultra low-power package. It is ideal for media players, mobile phones, control panels, medical instruments, and home entertainment devices to control streaming media, audio, balance, menus, play lists and gaming functions that involve rotation and steering. The sensor can be integrated directly into the device's host processor without the need for a dedicated microprocessor. "Wake on touch" functionality allows for low power consumption for battery-powered devices. Various actuator materials, including metallic, can be used to create unique design aesthetics.
Description:
Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. Its built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, make it ideal for OEM usage in motion detection equipment. This module is ideally suitable for false alarms reduction in intruder detectors when work together with Passive Infrared (PIR) sensor. It can also be used for auto-door opening and vehicle speed measurement.
Specifications:
Features:
Applications:
Power input 3V-5V DC Regulated Power Supply Working Current- Standby State- <=245uA Playing state- <=250mA Audio Format - mp3 Audio Output power- 8 ohm/0.5W (typical value) Detection Range- <=4m (120 degree angle) including mini USB Port and Micro SD Card Slot
This popular ultrasonic distance sensor provides stable and accurate distance measurements from 2cm to 450cm. It has an focus of less than 15 degrees and an accuracy of about 2mm.
Usage: Connect the VCC and GND pins to a 5V power supply, the trigger input (Trig) pin to a digital output and the echo (Echo) pin to a digital input on your robot's microcontroller. Pulse the trigger (Trig) pin high for at least 10us (microseconds) and then wait for a high level on the echo (Echo) pin. The amount of time it takes to receive the echo corresponds to the distance that the ultrasonic sound has travelled. The quicker the response, the closer your robot is to an obstacle.
This sensor uses ultrasonic sound to measure distance just like bats and dolphins do. Ultrasonic sound has such a high pitch that humans cannot hear it. This particular sensor sends out an ultrasonic sound that has a frequency of about 40kHz. The sensor has two main parts: a transducer that creates an ultrasonic sound and another listens to it's echo. To use this sensor to measure distance, the robot's brain must measure the amount of time it takes for the ultrasonic sound to travel.
Sound travels at approximately 340 meters per second. This corresponds to about 29.412us (microseconds) per centimeter. To measure the distance the sound has travelled we use the formula: Distance = (Time x SpeedOfSound) / 2. The "2" is in the formula because the sound has to travel back and fourth. First the sound travels away from the sensor, then it bounces off of a surface and returns back. The easy way to read the distance as centimeters is use the formula: Centimeters = ((Microseconds / 2) / 29). For example, if it takes 100us (microseconds) for the ultrasonic sound to bounce back, then the distance is ((100 / 2) / 29) centimeters or about 1.7 centimeters.
Pro-Wave presents a series of mechno-electrical sensors and detectors produced by advanced piezoelectric polymer film technology. The polymer film of polyvinylidene fluoride (PVF2) exhibits a conspicuous piezoelectric effect and also has high compliance comparing with other piezoelectric crystals or ceramic materials. Because of its superior piezoelectric strain constant (g value), 10-20 times larger than piezoelectric ceramic, it is an ideal sensing material for converting mechanical to electrical energy. Besides the standard products shown on this catalogue, we are also developing a series of sensing devices by using this particular piezoelectric thin film material. Please contact with us for your special needs.
The GP2D120 is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 1.5" to 12". The shorter range gives you higher resolution measurements, and the lower minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this sensor very easy to use.
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 4 cm to 30 cm (1.5" to 12"); a plot of distance versus output voltage is shown below.
The GP2D120 uses a 3-pin JST connector that works with our 3-pin JST cables for Sharp distance sensors (not included) as shown in the top picture on the right. It is also simple to solder three wires to the sensor where the connector pins are mounted (see the lower picture to the right). When looking at the back, the three connections from left to right are power, ground, and the output signal.
Feature summary
Description
GP2Y0A02YK0F is a distance measuring sensor unit,composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used asa proximity sensor
Features
Agency approvals/Compliance1. Compliant with RoHS directive (2002/95/EC)
Applications
Description
GP2Y0A21YK0F is a distance measuring sensor unit,composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used asa proximity sensorFeatures
Agency approvals/Compliance1. Compliant with RoHS directive (2002/95/EC)
Applications
Description
GP2Y0A710K0F is a distance measuring sensor unit, composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used asa proximity sensor
Agency approvals/Compliance1. Compliant with RoHS directive(2002/95/EC)
Features
Applications
This is a breakout module for Freescale's MMA7455 low power 3-axis Digital Accelerometer. The MMA7455 accelerometer interfaces with your microcontroller over I2C/SPI Interface. The accelerometer features signal conditioning, low pass filter and temperature compensation on-chip. Therefore immune to noisy output.
The Module works can be powered using a 5V, 3.7V or 3.3V power supply source.. The 8-bit/10-bit values of all the 3-axis can be accessed by reading the respective registers through SPI/I2C communication. The trimming of offsets in the values is possible by writing the offset value to the respective offset registers during the calibration process.
Selectable Sensitivity of 2g, 4g, 8g in 8-bit mode and 2g, 8g in 10-bit mode.
This digital temperature sensor will tell you, with 9 to 12 bit resolution!Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Arduino pin. Simple to use and highly accurate. Measures temperatures from -55°C to +125°C (-67°F to +257°F). Features:1 board DS18B20 chip DS18B20 chip left 3P round hole seat is easily accessible at the same time 2 chip pin all leads, built-in pull-up resistor 3, on-board power indicator 4, board size: 21 (mm) x10 (mm)
Features : On-board TCS3200 color sensor. Support 3V-5V voltage output Output frequency voltage: 0 - 5V Can be connected directly with Microcontroller (ARDUINO) Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6(mm) x24.4(mm).
Features:
Features:
