HOT POT SENSORS
Offering you a complete choice of products which include HOT POT SENSORS such as Industrial Motion & Position Sensors HotPot 50mm, Industrial Motion & Position Sensors HotPot 0100mm and Sensor Hotpot 10k Ohm 25mm.
HOT POT SENSORS
Industrial Motion & Position Sensors HotPot 50mm
Features:
High Life Cycle
High Temperature Capability
Linear Position Sensor
IP65 Dust Proof, water proof,
Fibreglass substrate
3M pressure Sensitive Adhesive(PSA)
Upon request
-Male or Female nicomatic connectors
-wiper of 1-3 newton force to actual part
-contactless option available
Mechanical Specifications:
Life cycle> 10 million
height<=0.51mm
Electrical Specification:
Resistance Standard: 10 k ohms
Resistance custom- 5 k to 100 k ohms
Effective electrical Travel: 10 to 1200 mm
Power rating: 1 watt max
Resolution: Analog output theriotically infinite
Dielectric value: No affect @500 VAC for 1 minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.
The HotPot is a three-wire system with two resistive output channels and an electrical collector channel
High Life Cycle
High Temperature Capability
Linear Position Sensor
IP65 Dust Proof, water proof,
Fibreglass substrate
3M pressure Sensitive Adhesive(PSA)
Upon request
-Male or Female nicomatic connectors
-wiper of 1-3 newton force to actual part
-contactless option available
Mechanical Specifications:
Life cycle> 10 million
height<=0.51mm
Electrical Specification:
Resistance Standard: 10 k ohms
Resistance custom- 5 k to 100 k ohms
Effective electrical Travel: 10 to 1200 mm
Power rating: 1 watt max
Resolution: Analog output theriotically infinite
Dielectric value: No affect @500 VAC for 1 minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.
The HotPot is a three-wire system with two resistive output channels and an electrical collector channel
Industrial Motion & Position Sensors HotPot 0100mm
Features:
High Life Cycle
- High Temperature Capability
- Linear Position Sensor
- IP65 Dust Proof, Water Proof (Intense Spray)
- Fiberglass Substrate
- 3M Pressure Sensitive Adhesive (PSA)
- Upon Request
- Male or Female Nicomatic Connectors
- Wiper of 1-3 Newton Force to Actuate
Part
- Contactless Options Available
Mechanical Specification:
Life Cycle: >10 million
-Height: 0.51mm (0.020")
-Actuation Force (with a 10mm wide active cavity):
-40°C 3.0 to 5.0 N
-25°C 2.0 to 5.0 N
+23°C 0.8 to 2.0 N
+85°C 0.7 to 1.8 N
Electrical Specifications:
Resistance - Standard: 10k Ohms
(lengths >300mm = 20k Ohms)
-Resistance - Custom: 5k to 100k Ohms
-Resistance Tolerance: ±20%
-Effective Electrical Travel: 10 to 1200mm
-Linearity (Independent): Linear ±1% or ±3%
Rotary ±3% or ±5%
-Repeatability: No hysteresis, but with any wiper
looseness some hysteresis will occur
-Power Rating (depending on size, varies with
length and temperature): 1 Watt max. @ 25°C,
0.5 Watt recommended
-Resolution: Analog output theoretically infinite;
affected by variation of contact wiper surface
area.
-Dielectric Value: No affect @ 500VAC for 1
minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider. The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.
Minimum Force: 1 Newton
-Maximum Force: 3 Newtons
-Tip Material: Delrin
-Thread Pitch: M1.0 (1mm)
High Life Cycle
- High Temperature Capability
- Linear Position Sensor
- IP65 Dust Proof, Water Proof (Intense Spray)
- Fiberglass Substrate
- 3M Pressure Sensitive Adhesive (PSA)
- Upon Request
- Male or Female Nicomatic Connectors
- Wiper of 1-3 Newton Force to Actuate
Part
- Contactless Options Available
Mechanical Specification:
Life Cycle: >10 million
-Height: 0.51mm (0.020")
-Actuation Force (with a 10mm wide active cavity):
-40°C 3.0 to 5.0 N
-25°C 2.0 to 5.0 N
+23°C 0.8 to 2.0 N
+85°C 0.7 to 1.8 N
Electrical Specifications:
Resistance - Standard: 10k Ohms
(lengths >300mm = 20k Ohms)
-Resistance - Custom: 5k to 100k Ohms
-Resistance Tolerance: ±20%
-Effective Electrical Travel: 10 to 1200mm
-Linearity (Independent): Linear ±1% or ±3%
Rotary ±3% or ±5%
-Repeatability: No hysteresis, but with any wiper
looseness some hysteresis will occur
-Power Rating (depending on size, varies with
length and temperature): 1 Watt max. @ 25°C,
0.5 Watt recommended
-Resolution: Analog output theoretically infinite;
affected by variation of contact wiper surface
area.
-Dielectric Value: No affect @ 500VAC for 1
minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider. The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.
Minimum Force: 1 Newton
-Maximum Force: 3 Newtons
-Tip Material: Delrin
-Thread Pitch: M1.0 (1mm)
Sensor Hotpot 10k Ohm 25mm
Features:
High Life cycle
High temperature Capability
Linear position sensor
IP65 Dust Proof,(intense spray)
Fibreglass substrate
3M Pressure sensitive adhesive(PSA)
Upon Request
-Male or Female Nicomatic Connectors
-Wiper of 1-3 Newton Force to actuate part
-Contactless part available
Mechanical Speciications:
Life Cycle >10 million
Height<=0.51mm
Electrical Specification:
Resistance Standard: 10 K ohm
Resistance Custom 5 K to 100 k ohm
Effective Electrical travel: 10 to 1200 mm
power rating: 1 watt max
Resolution: Analog output theritically infinite
affected by variation of contact wiper surface area
Dielectric Value: No affect @500VAC for 1 minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.
High Life cycle
High temperature Capability
Linear position sensor
IP65 Dust Proof,(intense spray)
Fibreglass substrate
3M Pressure sensitive adhesive(PSA)
Upon Request
-Male or Female Nicomatic Connectors
-Wiper of 1-3 Newton Force to actuate part
-Contactless part available
Mechanical Speciications:
Life Cycle >10 million
Height<=0.51mm
Electrical Specification:
Resistance Standard: 10 K ohm
Resistance Custom 5 K to 100 k ohm
Effective Electrical travel: 10 to 1200 mm
power rating: 1 watt max
Resolution: Analog output theritically infinite
affected by variation of contact wiper surface area
Dielectric Value: No affect @500VAC for 1 minute
How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.