Hi-Link Wifi Module & Power Module in Chennai
We Are Distributor of HI-LINK(HK) CO.,LTD. in India. We are Stockiest and Supplier For Wifi Module And Power Module Of Hi-link.
AC-DC Power Module HLK-PM01 in chennai
This is a rather small module that can supply 5V/0.6A from either 120VAC or 230VAC, this makes it perfect for small projects that needs a 5 volt supply from mains.
- Meet UL, CE requirements,
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
- Operation Temperature: -20—+60°C
- Store Temperature: -40—+80°C
- Relative humidity: 5—95%
- Rated input voltage:100-240VAc
- Maximum input current: <0.2A
- Input current surge: <10A
- maximum input voltage: 270VAc
- Input Low Voltage Efficiency: Vin=110VAc, Output full-load: 69%
- Input High Voltage Efficiency: Vin=220VAc, output full-load: 70%
- Long-term reliability: MTBF 100000h
- Load rated output voltage: +5±0.1
- Short-term maximum output current: 1000mA
- The maximum output current for a long time: 600mA
- Output ripple and noise: 50 mVpp Rated input voltage, full load. Using 20MHz of bandwidth, the load side with 10uF and 0.1uF capacitor
- Shell maximum surface temperature does not exceed 60°C
HLK-PM03 Power Module in chennai
AC-DC 220V To 3.3 Visolating Switch Power Supply Module/ Step-Down Module
- 1. Meet UL, CE requirements,
- 2. Ultra-thin, ultra-small
- 3. All voltage input (AC: 90 ~ 264V)
- 4. Low ripple and low noise
- 5. Output overload and short circuit protection
- 6. High efficiency, high power density
- 7. The product is designed to meet the requirements of EMC and Safety Test
- 8. Low power consumption, environmental protection, no-load loss <0.1W
Power Module HLK-5M05 - 5W in chennai
The series is a custom-designed power modules with high efficiency and small volume,made by Hi-link Electronics company.. There are many advantage of these modules,such as???Global input voltage range, low temperature rise, low power, high efficiency,High reliability, high security isolation, etc. It has been widely used in smart home, automation and control, communications equipment, instrumentation And other industries, when applied to electromagnetic compatibility relatively harsh environment, reference should be Circuit.
- 1. Meet UL, CE requirements,
- 2. Ultra-thin, ultra-small
- 3. All voltage input (90~240V AC)
- 4. Low ripple and low noise
- 5. Output overload and short circuit protection
- 6. High efficiency, high power density
- 7. The product is designed to meet the requirements of EMC and Safety Test
- 8. Low power consumption, environmental protection, no-load loss <0.1W
HLK-PM12 Power Module in chennai
- 1. Meet UL, CE requirements,
- 2. Ultra-thin, ultra-small
- 2. All voltage input (AC: 90 ~ 264V)
- 3. Low ripple and low noise
- 4. Output overload and short circuit protection
- 5. High efficiency, high power density
- 6. The product is designed to meet the requirements of EMC and Safety Test
- 7. Low power consumption, environmental protection, no-load loss <0.1W
Wifi Module Hlk-rm04 with 16m Ram 8m Flash in chennai
HLK-RM04 is a low-cost embedded UART-ETH-WIFI module (serial port - Ethernet - Wireless network). This product is an embedded module based on the universal serial interface network standard, built-in TCP / IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the conversions. Through the HLK-RM04 module, the traditional serial devices do not need to change any configuration; data can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet.
Wifi Module Hlk-rm04 with 32m Ram 8m Flash in chennai
HLK-RM04 is a new low-cost embedded UART-ETH-WIFI module (serial port - Ethernet - Wireless network) developed by Shenzhen Hi-Link Electronic co., Ltd.This product is an embedded module based on the universal serial interface network standard, built-in TCP / IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the conversions.Through the HLK-RM04 module, the traditional serial devices do not need to change any configuration; data can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet.
HLK-RM04 UART TO WIFI WITH Internal Antenna Test Board in chennai
Features:
Full function of wireless router: Support 5 types of work mode: AP, Client, Repeater, Bridge, Router AP mode:Default work mode. In this mode, the device works as a wireless access point, support for plug-and-play, and no configuration needed. Router mode:In this mode, the device is equivalent to a wireless router, wired interfaces can be used as WAN, wireless used as LAN. Multiple wireless clients can share a broadband line to search the Internet. Repeater mode:Use the radio relay function of the device, achieve the radio signal repeat and amplified, and form a new radio coverage area, ultimately attain the purpose of extending the coverage of the wireless network. Bridge mode:With the Bridging function of equipment, firstly, the module RM04 establish a wireless connection with the front-end wireless network itself ,then sending the wireless signal, at the same time, form a new wireless coverage, signal weak and signal blind spot can be solved effectively. Client mode:The AP to work in this mode for the main AP is a wireless client, the equivalent of a wireless network card.
Low-Cost Embedded UART-ETH-WIFI Module in chennai
Features:
Low cost UART-ETH-WIFI module. It can used to connect any microcontroller to internet/LAN. Its a simple and cheap module for connecting the microcontroller using wifi. Its basically a Linux powered Router with serial port output.module is almost half price with base board.You need the base board only if you use the Ethernet cable. If you want to use wifi then there is no need for the base board. But if you are a beginner then better you buy with base board. But you can setup the module even without the base board. I am going to explain to setup the module without base board. This module is a low cost embedded UART-ETH- WIFI Module (Serial port -Ethernet- wireless network) developed by Rajguru electronics. This product is an embedded module based on the Universal serial interface network standard, built in TCP/IP protocol Stack. enabling the user serial port, Ethernet, Wireless Network (WiFi), interface between the conversions. Through the module, the traditional serial devices do not need change any configuration; data can be transmitted through the internet network. Provide a quick solution for the user's devices to transfer data via ethernet.
M30 WIFI Module in chennai
Description:
This product is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port, wireless network (wifi) interface between the onversions. Through the HLK-M30 module, the traditional serial devices do not need to change any configuration, userdata can be transmitted through the Internet network. Provide a quick solution for the user's serial devices to transfer data via WiFi.
- 2.4GHz 802.11b/g/n,compatible
- WiFi Sta/Soft AP Mode
- Support Smart Connection
- The range of baudrate: 1200~115200bps
- Support transparent transmission mode
- Support multiple security authenti-cation mechanisms:
- WEP64/WEP128/ TKIP/ AES
- WEP/WPA-PSK/WPA2-PSK
- Support wireless roam
- Support multiple network protocols:
- TCP/UDP/ /DHCP/DNS
- Support AT instruction Set
- Device Dimensions 16.3mm x 14mm x 2.24mm (Chipset Size)
- WiFi Led Control
- WiFi Power Switch
- Smart Home; Smart Building
- OBDII WiFi Diagnose
- RFID Data Transfer
- Toys and Gaming Peripherals
- Industrial Systems
- Telemetry
- Remote Control
- Low Power consumption
- Ready to use in products
- Minimizes product development
- No RF test required for systems
- Serial to WiFi; Smart; Small;
- Support Smart Connection
- Transparent Transmission
- Compliant with CE and FCC
HLK-M35 serial uart to WiFi Wireless Module MT7681 in chennai
Description:
HLK-M35 is a new low-cost embedded UART-WIFI module (serial port -Wireless) This product is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port,wireless network (wifi) interface between the onversions.Through the HLK -M35 module, the traditional serial devices do not need to change any configuration,userdata can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via WIFI. This module is with lower power 3.3V 100mA, start time only need 1 seconds. Smart size, only 18*25*2.5mm, easier secondary development.
- Support 2 types of work mode: WiFi STA/AP.
Mt7681 Serial Wifi Module Development Board Hlk-m35 Kit in chennai
Product Description :
This product contains HLK-M35 Kit (M35 + base + module test antenna). This module for ready-made module has been developed a good system, without the development of two times. There is no use; development of products from other manufacturers to provide. The characteristic of the M35 moduleTaiwan's new scheme of embedded WIFISupport external and internal antenna selectionSupport pins and patch two schemesSmall volume 25*18MMUltra low power WIFI module (excellent power saving)Start time 1 secondPerfect support 802.11 b/g/n protocolSupports all WIFI encryption methods available on the marketWithout any user driven, the user only need to use the microcontroller as a common serial portSupport AP (hot spots) /STA (WIFI node)TCP Server/TCP Client/UDP Server/UDP Client support workSupport DHCP DNS HTTP advanced application layer protocolSupport serial configuration of AT commands (support serial configuration tool)LAN support search protocol search moduleSupport SmartLink intelligent network functions, using a mobile phone APP control module is a key connection of ordinary wireless routerThrough the CE / FCC certification, in line with the ROHS standard 2014 with smart home market, the explosive growth, we generally believe that the smart home is the trend of the times, data predict 2016 smart home market will exceed trillion, in order to share a piece of cake, in order to give your product is in flying wings, serial WiFi module will be your best choice.
Serial Wifi Server - HLK-WR02 in chennai
Product Description :
Descriptions :-
HLK-WR02 is a serial wifi router developed by Shenzhen Hi-Link Electronic Co.,Ltd. This product is based on on the universal serial interface network standard, built-in TCP / IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the conversions. Through the HLK-WR02 the traditional serial devices do not need to change any configuration; data can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet.
- 1 can achieve RS232 or RS485 to WIFI, RS232 or RS485 to RJ45, RJ45 to WIFI transparent transmission of data, ensure the stability of data transmission.
- 2 can realize Ethernet to WIFI transparent transmission module, can realize the wireless LAN cable to wireless data transformation function.
- 3 support AP STA mode of operation at the same time, the module can be used as AP for wireless terminal, and at the same time as the addition of STA to the other wireless routing equipment.Factory direct sales, ensure the technical support service, can also OEM and ODM
- 1 onboard UART WIFI core module, contains all of the features of this module, please refer to the module description.
- 2 support the RS232 interface, and computer pin definitions consistent common port (needle)Automatic switch RS485 interface
- 3 extremely low latency
- 4 DC 5 - 18V ultra wide voltage input, can provide 2A current DCDC power chip LM2576HVS, guarantee the reliability of the system.5 DCDC power chip can provide 75% ~ 85% efficiency, suitable for use in battery powered systems.
- 6 RS485 and RS232 interface
- 7 Reload heavy initial configuration button, also need not worry again set the wrong. (working status, press 3-5 second load release can load the default setting and automatic restart)
- 8 rich status indicator Power Ready Link RXD TXD
- 9 DC3.5 power socket, reservation access 2.54 spacing hole can choose
- 10 power supply, serial cable, cable, convenient for customers to use.
- Home Automation, IOT, Industrial Control, Medical Surveillance, Phone control over Wi-Fi and so on.
HLK-SW16 16 Channel WiFi Controlled Relay Board in chennai
Product Description :
HLK-SW16 is a new professional remote control terminal developed by Hi-Link Electronic Co., Ltd, which can implement the TCP connection through the gateway and establish communication with the remote device. It make the network client and equipment connect directly on the basis of none modifying the original communication protocol, saving development cycle, improve the user’s experience. Compared with the traditional way (dynamic domain name plus router port mapping), it has incomparable superiority, eliminating the need for users to apply for a dynamic domain name, make frequent operations, such as port mapping on the router, so that equipment can achieve plug and play results. Note: There is no on-board voltage regulator, so use a proper 5V DC regulated supply and not some low cost wall adapter. Wrong power supply can damage the module also. You will get an android app download link, after the purchase. We will also provide the android application: Device ID and Password after the purchase. After the purchase, you can also send us your WiFi SSID and Password, and we can pre-configure it for you. So, that its just plug and play for you. The sale is for hardware only, we don't provide software support for these. It does not comes with any software or manul. We can't provide technical support for example on how to configure your router, etc. to allow inbound connections to this module. You need to contact your network administrator, technical support provider, etc. We will be charging extra for any technical support regarding these. Any technical support will be charged extra.
Serial Wifi Module Hlk-wifi-m03 in chennai
Product Description :
model : hlk-wifi-m03 feature product interface double ( 2 x 4 ) pin type interface support Baud rate : range 1200 ~ 115200bps support hardware rts / cts flow control single 3.3v power supply wireless support ieee802.11b / g wireless frequency range of : support 2.412 ~ 2.484 ghz support two wireless network type : The base of the net infra ( ) and ad ( adhoc ) support multiple safety certification : mechanism wep64 / wep128 / tkip / ccmp ( aes ) wep / wpa-psk / wpa2-psk support speed networking support wireless roaming other support multiple network protocol : tcp udp / / icmp / dhcp / dns / http support automatic and order 20 modes
Hlk-3E33 Wireless Card Leiling Rt3070 Chip 150M Ap Mode in chennai
Product Description :
Support 64/128 bit WEP encryption, and at the same time support the WPA/WPA wpa2-psk connected/connected wpa2-psk security mechanism A key to support the AP mode, set up the AP, super easy! Easily share Internet. High cost performance The main performance of 802.11 b: 1,2,5.5, 11 MBPS; 802.11 g; 6,9,12,18,24,36,48,54 megabits per second; 802.11 n: (20 MHZ) MCSO - 7, 72 MBPS, 40 MHZ) (MCSO - 7, up to 150 MBPS OFDM modulation mode: Peak rate: 150 MBPS Peak throughput rate: 90 MBPS Intelligent power management functions Safe mode: 802.11 b/g/n, WPA, connected, WMM, WMM - PS, WHQL, Cisco CCX
HLK-3M05 Low Power Consumption USB Wireless Network wifi in chennai
Product Description :
This WIFI modules suitable for: desktop computers, netbooks, MID (tablet), set-top boxes, cameras, Internet radio, digital photo frame, fitness equipment, medical equipment, lighting control, door control, logistics network monitoring equipment, and so on need to adopt various use wireless transmitting data. Desktop computers, netbooks, MID (tablet), set-top boxes, cameras, Internet radio, digital photo frame, fitness equipment, medical equipment, lighting control, door control, logistics network monitoring equipment.
- - Hardware:Chipset Ralink RT3070
- - Host interface:USB2.0/1.1, type A
- - LEDS:Link/ Activity
- - RF
- - Antenna:Built-in PCB antenna
- - Frequency:2412~2483.5MHz, ISM band.
- - Transmit Power:802.11b:17+/-1.5dBm; 802.11g:14+/-1.5dBm
- - Receive Sensitivity:802.11b:-84+/-1.5dBm@11Mbps; 802.11g:-69+/-1.5dBm@54Mbps
- - Software
- - Operation System:Windows CE/2000/XP/Vista; Linux 2.6.X;Mac OS X
- - Security:WEP 64/128bit,WPA,WPA2,802.1X ,Cisco CCS V1.0,2.0 and V3.0 Compliant.
- - Voltage Range*:DC 5.0V±5%:
- - Operating Temperature: 0℃-50℃
- - Storage Temperature:-20℃-70℃
- - Operating Humidity:RH 95%(Non-Condensing)
- - Storage Humidity:RH 95%(Non-Condensing)
- - Chipset: Ralink RT3070
- - Standard: 802.11N compliance, Peak rate: 150Mbps
- - Frequency: 2.4GHz, ISM band
- - External antenna via IPEX receptacle
- - Host interface: USB 2.0/1.1,
- - USB Connection:6-pin. 2.0mm pitch male jumper
- - Operation System: Windows CE/2000/XP/Vista
- - Security:WHQL;Cisco CCX Linux2.6X;Mac OSX
- - Operating Voltage:5.0 VDC +/- 5%
- - Size: 40x18x8.7( PIN height)mm
HLK-RM08K Seriel Port to WIFI Module in chennai
Product Description :
- The chip of HLK-RM08K is MT7688K , which can replace HLK-RM04. There are 4 net exports, 2 seriel ports and the power consumption is about 100mA. - HLK-RM08K is a embedded module of UART-ETH-WIFI (serial-Ethernet-wireless network), which is based on MT7688K, a smart home networking WIFI module. - This product is a embedded module that based the common serial interface that meets the network standard , built-in TCP/IP protocol stack, the user can achieve serial port, Ethernet, wireless network (WIFI) conversion between the 3 interfaces. - Through the module, the traditional serial device, in the case of no change to any configuration, you can transfer your data through the Internet network.
| Network standard | Wireless standard: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Cable standard: IEEE 802.3, IEEE 802.3u | |
| Wireless transmission rate | 11n: Max.150Mbps 11g: Max.54Mbps 11b: Max.11Mbps |
| Channel number | 1-14 |
| Frequency range | 2.4-2.4835G |
| Transmit power | 12-15DBM |
| Interface | 2 Ethernet ports, 2 serial ports, 1 USB port (host/slave), GPIO |
| Antenna | |
| Antenna type | Board antenna / external antenna (optional) |
| Function and parameter | |
| WIFI working mode | Wireless network card / wireless access point / wireless router |
| WDS function | WDS wireless bridge |
| Wireless security | Wireless MAC address filtering |
| Wireless switch security function | |
| 64/128/152 bit WEP encryption | |
| WPA/WPA2, WPA-PSK/WPA2-PSK security mechanism | |
| Network management | Remote Web management |
| Configuration file import and export | |
| WEB software upgrade | |
| Serial communication network | |
| TCP connection | Maximum connection number >20 |
| UDP connection | Maximum connection number >20 |
| Serial baud rate | 1200~2500000bps (1<=n<=65535 2500000/n) |
Other parameters | |
| Indicator Status | Indicator Status |
| Environmental standard | Working temperature: -20-55 |
| Working humidity: 10%-90%RH (not setting) | |
| Storage temperature: -40-80 | |
| Storage humidity: 5%-90%RH (not setting) | |
| Other properties | Band bandwidth (optional): 20MHz, 40MHz, automatic |
Wireless Router Module HLK-RM02 in chennai
- Product:Wireless router PCBA
- Net standard:wireless:IEEE 802.11n,IEEE 802.11g,IEEE 802.11b wired:IEEE 802.3,IEEE 802.3u
- Wireless transmission rate:11n: up to 150Mbps 11g:up to 54Mbps 11b:up to11Mbps
- tracks number:1-14
- frequency range:2.4-2.4835G
- transmitting power:12-15DBM
- interface:One 10/100Mbps LAN/WAN reset interface
- Antenna
- Type:Onboard antenn
- Operating temperature:0-40 Centigrade
- Operating humidity:10%-90%RH(no condensing)
- Storage temperature:-40-70 Centigrade
- Storage humidity:5%-90%RH(no condensing)
- Additional properties
- Band bandwidth selectable:20MHz,40MHz,automatic
- Support 5 types of work mode: AP, Client, Repeater, Bridge, Router
- AP mode-Default work mode. In this mode, the device works as a wireless access point, support for plug-and-play, and no configuration needed.
- Router mode-In this mode, the device is equivalent to a wireless router, wired interfaces can be used as WAN, wireless used as LAN. Multiple
- wireless clients can share a broadband line to search the Internet.
- Repeater mode -Use the radio relay function of the device, achieve the radio signal repeat and amplified, and form a new radio coverage area, ultimately attain the purpose of extending the coverage of the wireless network.
- Bridge mode-With the Bridging function of equipment, firstly, the module establish a wireless connection with the front-end wireless network itself ,then sending the wireless signal, at the same time, form a new wireless coverage, signal weak and signal blind spot can be solved effectively.
- Client mode-The AP to work in this mode for the main AP is a wireless client, the equivalent of a wireless network card.
WIFI Router Module : HLK-RM08A in chennai
Product Description :
HLK-RM08A is a wireless routing module which can be applied in the fields of camera IP, smart home and other things. The main chip of the module is MediaTek the latest system single chip MT7688AN, supports Wifi 802.11n standard, no line transmission rate up to 150Mbps. MT7688AN built in a MIPS 24KEc CPU DDR2, support, 10/100M 1-port, host USB2.0, I2C, SD-XC, I2S/PCM, UART,, GPIO, 575/580MHz.HLK-RM08A has a rich interface, which can better solve the monitoring audio and video services, and has excellent RF performance, wireless transmission is more stable. Main characteristics1.Built in MIPS24KEc/580MHz CPU, 802.11b/g /n2 work in 1T1R, 2.4GHz data transfer rate up to 150Mbps3 Support Linux platform,OpenWRT a complete protocol stack (protocol stack)4 Lead interface: 5-port Ethernet 10/100M, USB2.0, I2C, I2S, TF/SD card, GPIO interface, 2UART