Arm 7 Development Board
Supplier & Trader of Arm 7 Development Board & ARM Seven Development Board. Our product range also comprises of GSM Modems, GPS Receiver and Bluetooth Module.
ARM Seven Development Board
Our offered quality tested ARM Seven Development Board is a powerful platform which comes with a micro controller on-chip memory. These boards are ideal for developing embedded applications like high speed wireless communication, real time data monitoring and control, interactive control panels and USB based data logging.
Specification:
- 512 bytes of I2C external EEPROM
- USB Type B Connector
- SD / MMC card holder
- 10pin(2X5) FRC JTAG connector for flashing and debugging
- 50 Pin Expansion header
MicroModule
Supplier & Trader of MicroModule. Our product range also comprises of GSM Modems, GPS Receiver and Bluetooth Module.
Micro Module
The Micro Module is a finger-actuated "mouse" pointing module that provides complete 360-degree directional control and accurate speed control simultaneously. Users control direction by applying pressure in the direction of the desired movement and adjust the speed by altering the amount of pressure on the device.
Micro Module is ideal for computer cursor control in rugged mobile computers, hardened keyboards, navigation systems, machine control panels, pan and tilt controllers, motion controllers, CNC controllers and medical control equipment. It's a durable, maintenance-free "miniature" solution that works well in tight spaces and is capable of delivering "mouse" lifetimes of more than 3 million actuations. An integrated sealing rib also makes it possible to seal MicroModule into a system during installation.
The device is available in both USB or PS/2 versions and three connecting cable options. For prolonged exposure to fuels, oils, solvents and aggressive fluids we offer a robust keypad option.
HOT POT SENSORS
Our range of products include HOT POT SENSORS such as Industrial Motion & Position Sensors HotPot 50mm, Industrial Motion & Position Sensors HotPot 0100mm and Sensor Hotpot 10k Ohm 25mm.
Industrial Motion & Position Sensors HotPot 50mm
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider. The HotPot is a three-wire system with two resistive output channels and an electrical collector channel
Features
- Resistance Standard: 10 k ohms
- Resistance custom- 5 k to 100 k ohms
- Effective electrical Travel: 10 to 1200 mm
- Power rating: 1 watt max
- Resolution: Analog output theriotically infinite
Industrial Motion & Position Sensors HotPot 0100mm
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider. The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.
Features
- High Temperature Capability
- Linear Position Sensor
- IP65 Dust Proof, Water Proof (Intense Spray)
- Fiberglass Substrate
- 3M Pressure Sensitive Adhesive (PSA)
Sensor Hotpot 10k Ohm 25mm
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.
Features
- High Life cycle
- High temperature Capability/li>
- Linear position sensor
- IP65 Dust Proof,(intense spray)
- Fibreglass substrate
MAGNETOPOT SENSORS
Providing you the best range of MAGNETOPOT SENSORS such as Proximity Sensors MagnetoPot 50mm, Sensor MagnetoPot 10K OHM 25MM and Proximity Sensors MagnetoPot 100mm with effective & timely delivery.
Proximity Sensors MagnetoPot 50mm
The MagnetoPot is made of polyester, fiberglass and kapton, depending on the specification required. It functions as a voltage divider, a resistor or rheostat, as desired by the end-user. By bringing the exterior magnet into a proximity necessary to connect with the internal magnetic attractors, the operator can obtain linear position sensing based on the location of the exterior magnet. As the exterior magnet moves, so does the electrical output of the MagnetoPot.The MagnetoPot should not be mounted to a ferromagnetic surface.
Sensor MagnetoPot 10K OHM 25MM
The wiper inside the sealed pot is magnetic or ferromagnetic, and will only perform if connected with an exterior magnet. As opposed to a magnetically-based Reed Switch, which gives simply "open" or "close" signals, the MagnetoPot gives the full linear travel of a hydraulic or pneumatic cylinder. In liquid level applications, the MagnetoPot can attach to the outside of a liquid tank and give position of the magnet inside the float. No water ingress, no wearing of the part by environment, because the MagnetoPot is outside of the tank.
Proximity Sensors MagnetoPot 100mm
The MagnetoPot is simple, yet elegant in its ability to track motion in a contactless manner. A magnet on the inside of a cylinder, or a magnet on the opposing side of a motion device will guide the built-in magnetics of the MagnetoPot for position location through a potentiometric output.The MagnetoPot is a sealed potentiometer, in the membrane potentiometer tradition, yet it does not require a wiper/actuator to connect the collector and the resistor. Instead, the MagnetoPot is controlled by an outside magnet, which attracts the magnetic forces within the MagnetoPot to connect to the linear resistor and give linear potentiometer feedback.The wiper inside the sealed pot is magnetic or ferromagnetic, and will only perform if connected with an exterior magnet. As opposed to a magnetically-based Reed Switch, which gives simply "open" or "close" signals, the MagnetoPot gives the full linear travel of a hydraulic or pneumatic cylinder. In liquid level applications, the MagnetoPot can attach to the outside of a liquid tank and give position of the magnet inside the float. No water ingress, no wearing of the part by environment, because the MagnetoPot is outside of the tank.