Ocean College and School Students Science Projects materials

With the aid of our XBEE USB Wireless Module customers can easily communicate between PC to PC or PC to embedded boards. These modules are highly suitable for changing the modules of varied devices using PC through USB port. We have equipped the adapters of these modules with five indicator LED's for depicting the status of the data being received or transmitted, power, signal strength of the recipient and other associated data.

Specifications of these XBEE USB Wireless Module are as follows:

• USB 2.0 compatible (No legacy RS232 required)
• USB powered
• RXD, TXD, RSSI, ASSOSIATE indicator LEDs
• Supports AT and API commands
• Achievable data rates: 2400-115200 bps
• Data output: CMOS(2.8-3.4V) UART interface
• Supported XBee wireless module
• Supported operating systems
• Windows Server 2008 R2
• Windows 7
• Windows 7 x64
• Windows Server 2008
• Windows Server 2008 x64
• Windows Vista
• Windows Vista x64
• Windows Server 2003
• Windows Server 2003 x64
• Windows XP
• Windows XP x64
• Windows 2000

Item Code: XB24-Z7WIT-004

Customers can avail from us 2.4GHz XBee XBEE/ZIGBEE Module Transreceiver for using as a serial command set. These modules facilitates the reliable and simple communication between computer systems, micro controllers and other devices with a serial port. Our product can even support point to point and multi-point networks.

Features of these XBEE/ZIGBEE Module Transreceiver are as follows:

• 3.3V @ 50mA
• 250kbps Max data rate
• 1mW output (+0dBm)
• 300ft (100m) range
• Wire antenna
• Fully FCC certified
• 6 10-bit ADC input pins
• 8 digital IO pins
• 128-bit encryption
• Local or over-air configuration
• AT or API command set

Item Code: XBP24-Z7WIT-004

Our company is offering a remarkable range of XBEE/ZIGBEE Pro Module Transreceiver which are precisely designed for long range communications. These modules have works up to a range of 1600 meters in straight line or 90 meters in the urban areas and are widely used for providing wireless end connectivity to the devices. Our product is perfect for PC to robots or robots to PC communications and can be directly connected to the serial port of micro controller. These are specifically are designed for high-throughput applications that requires low latency and predictable communication timings.

Features and specifications of our offered XBEE/ZIGBEE Pro Module Transreceiver are as follows:

Specifications:

• Model code: XBP24-Z7WIT-004
• Operating Frequency: ISM 2.4 GHz
• Antenna type: Wire antenna
• Indoor/Urban Range up to 300 ft. (90 m)
• Outdoor RF line-of-sight Range up to 1600meters
• Interface: Serial(UART) at 1200-115200 bps
• Transmit Current (typical) 295mA (@ 3.3 V)
• Idle / Receive Current (typical) 55mA (@ 3.3 V)
• Supply Voltage: 3.0 â 3.4 V
• Dimensions: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
• Operating Temperature: -40 to 85º C (industrial)

Features of the offered range are as follows:

• Supported Network Topologies: Point-to-point, Point to multi point & Peer-to-peer
• Number of Channels: (software selectable) 16 Direct Sequence Channels
• Addressing Options: PAN ID, Channel and Addresses
• Channel capacity: 12 Channels
• Addressing: 65000 network address available for each channel
• AT and API Command Modes for configuring module parameters
• Extensive command set
• Small form factor

Item Code: XB24-AWI-001

Specifications:

• Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
• Number of Channels: (software selectable) 16 Direct Sequence Channels
• Addressing Options: PAN ID, Channel and Addresses
• Channel capacity: 16 Channels
• Addressing: 65000 network address available for each channel
• AT and API Command Modes for configuring module parameters
• Extensive command set
• Small form factor