ARM11 Development Board
We are a coveted organization, indulged in supplying and trading Friendly Arm11 Board in numerous specifications and configurations. These boards are designed and developed using best quality raw material and cut edged technology as per the predefined industrial standards and quality norms.
Friendly Arm11 Mini6410 With 4.3 inches LCD
This is a S3C6410 ARM11 development board with a 4.3" TFT LCD. This board comes with a 256MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android support, advanced Video / graphic support with 3D acceleration.
Application areas of our offered products are :
- 1 x mini6410 development board
- 1 x TFT LCD: 4.3", 240x320, with touch panel
- 1 x usb cable
- 1 x Power adaptor (+5V)
- 1 x Ethernet cable
Friendly Arm11 Tiny 6410 With 4.3 Inches LCD
Friendly ARM Tiny 6410 Stamp Module with 533 MHz Samsung S3C6410 ARM11 processor.
Application areas of our offered products are
- Serial, SPI, USB, LCD, CMOS Camera Interfacen
- Analog Input and Output
- User Outputs: 4x LEDs/li>
- Expansion headers (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
Friendly Arm 11 Tiny 6410 With 7 Inches LCD
Friendly ARM Tiny 6410 Stamp Module with 533 MHz Samsung S3C6410 ARM11 processor.
Application areas of our offered products are :
- Serial, SPI, USB, LCD, CMOS Camera Interfacen
- Analog Input and Output
- User Outputs: 4x LEDs/li>
- Expansion headers (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
Friendly Arm 11 Mini 6410 With 7 Inches LCD
This is a S3C6410 ARM11 development board with a 4.3" TFT LCD. This board comes with a 256MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android support, advanced Video / graphic support with 3D acceleration.
Application areas of our offered products are
- 1 x mini6410 development board
- 1 x TFT LCD: 7"
- 1 x usb cable
- 1 x Power adaptor (+5V)
- 1 x Ethernet cable
Arm Board Accessories
We are a one of the leading Suppliers of Arm Board Accessories. Our proficient professionals are engaged in providing a vast variety of these products and are provided after in-depth assessment about the market trends and clients needs and requirements.
USB WiFi Module
We are engaged in providing a wide variety of USB WiFi Module procured from our trusted vendors. These are highly appreciable by our clients for its work efficiency and performance.
General Features :
- WLAN: IEEE 802.11b/g
- Data Rate: Up to 54 M bps
- Chip-set: VIA VT6656
SD WiFi Module
We are engaged in providing a wide variety of SD WiFi Module. These are widely known and appreciated for rugged, high-performance cards with the speed and reliability. These are manufactured using high-grade quality and are procured from trusted vendors.
Specifications :
- WLAN: IEEE 802.11b/g
- Chip set: Marvell 8686
CMOS-Camera Module
We are one of the renowned suppliers CMOS-Camera Module which is made of high-grade raw-materials procured from the trusted vendors.
General Features :
- Pixel: 1.3 mega pixel
- Resolution: 640 x 480 / 1280 x 1024
- Color: 24 bit
- Transmission rate: 30/15 fps
- Chip: OV9650
Low Cost RFID Reader Module
We are engaged in supplying a wide range of Display With Touch Panel. These products provided by our organization needs a speedy as well as accurate touching performance. These are used for the vast applications that include information kiosk, banks, pos kiosk & ATMS.
Specifications :
- Outer Dimension: 78 x 110 mm
- Display-Panel: N35 / T35 / X35 / W35<50ma
- 3.5"
Development Board 8051
This 8051 Development Board provides an easy and low cost way to develop projects on 8051 Micro Controller without the need to purchase any other equipment such as programmer or emulators
8051 Basic Development Board
This 8051 Development Board provides an easy and low cost way to develop projects on 8051 Micro Controller without the need to purchase any other equipment such as programmer or emulators
Specifications :
- The board is built on a high quality FR-4(1.6 mm) PCB with a green solder mask and a clear and legible white legend
- Onboard MAX232 interface circuit for easy communication with a computer and other serial devices (GPS modules, GSM Modems, etc)
- DC plug-in jack for power input
- Onboard bridge rectifier enables the board to accept both AC and DC input voltages
- Onboard 5V regulator(LM7805) with filtering capacitors and heatsink
8051 Development Board - Big
This 8051 Development Board provides an easy and low cost way to develop projects on 8051 Micro Controller without the need to purchase any other equipment such as programmer or emulators
Specifications :
- On board Regulated power supply
- Port Extension for all ports
- On board switch for ON/OFF
- Pull up resistor's for Port 0
- On board Demo projects
8051 Intermediate Development Board (Without USB)
This 8051 Development Board provides an easy and low cost way to develop projects on 8051 Micro Controller without the need to purchase any other equipment such as programmer or emulators
Specifications :
- The board is built on a high quality FR-4(1.6 mm) PCB with a green solder mask and a clear and legible white legend.All IO pins are labelled with their names along with any dual feature they support. This greatly simplifies prototyping
- Onboard RS232 interface circuit for easy communication with a computer and other serial devices
- On board 16x2 LCD connector with brightness control
- DC plug-in jack for power input
- Onboard bridge rectifier enables the board to accept both AC and DC input voltages
8051 Intermediate Development Board - USB
This 8051 Development Board provides an easy and low cost way to develop projects on 8051 Micro Controller without the need to purchase any other equipment such as programmer or emulators
Specifications :
- The board is built on a high quality FR-4(1.6 mm) PCB with a green solder mask and a clear and legible white legend. All IO pins are labelled with their names along with any dual feature they support. This greatly simplifies prototyping.
- Onboard USB to Serial converter for serial communication and programming over USB
- Onboard 16x2 LCD support
- Pull up resistor's for Port 0
- Onboard RS232 interface circuit for easy communication with a computer and other serial devices (GPS modules, GSM Modems, etc)
AVR Development Board
AVR Basic Development BoardA general purpose 40 pin AVR Basic Development Board with on board power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED, a 6 pin ISP header and a general purpose LED and Switch.
AVR Basic Development Board
A general purpose 40 pin AVR Basic Development Board with on board power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED, a 6 pin ISP header and a general purpose LED and Switch.
The board is compatible with the Atmega16, Atmega32 and other compatible 40 pin AVR microcontrollers. This board is perfect if you are just starting out with AVR programming.
AVR Intermediate Development Board
A general purpose AVR Intermediate Development Board with 16x2 LCD support, power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED, a 6 pin ISP header and 4 x general purpose LEDs and Switches. The board provides port extensions for all ports and also provides an empty hole for each IO pin, where wires and connectors can be soldered directly for further expansion.
Friendly Arm9 Mini2440 With VGA Board
A general purpose AVR Intermediate Development Board with onboard USB support, 16x2 LCD support, power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED, a 6 pin ISP header and 4 x general purpose LEDs and Switches. The board provides port extensions for all ports and also provides an empty hole for each IO pin, where wires and connectors can be soldered directly for further expansion.